Stratomizer® Dampered Face & Bypass Coils

Stratomizer® Dampered Face & Bypass Coils Stratomizer Dampered Face and Bypass Coils provide a state-of-the-art method of preheating and tempering fresh outside air while maintaining full steam pressure or hot water flow to the coil at all times. By the positioning of dampers, proportioned quantities of air are either directed through the heating surface or bypass the heating surface to achieve the required discharge air temperature. The dampers are automatically repositioned to maintain a set leaving air temperature when a change in outside temperature occurs. Stratomizer's performance is rated in accordance with ARI Standard 410.

Performance

• Maximum freeze protection
• Accurate temperature control
• Minimized stratification
• Constant air volume
• Minimum temperature override
• Sizes up to 80,000 CFM per coil

Applications

• Air conditioning system preheat
• Industrial make-up air
• Penthouse make-up air
• Air handling units preheat

Standard Coil Construction

• 14 gauge ASTM A525 galvanized steel casing
• Hot water or steam design
• 0.035" thick copper tubes - ( or optional )
• 0.010" think aluminum fins - ( or optional )
• Extruded anodized aluminum dampers
• Inlet damper blade edge seals
• Non-ferrous damper linkage
• Horizontal and vertical tube configurations
• Copper ferrules in tube sheets for wear resistance of the tubes
• Oil impregnated bronze bearings

Options

• Epoxy paint
• 300 series stainless steel casing
• Actuators - pneumatic or electric
• Temperature controls
• Freeze stat
• Phenolic / Epoxy coatings